Integrated with the latest LED technology and high power tri-color LED, Pro Color Par 21TC creates extraordinary color mixing and powerful light output
3 operation mode: DMX, Master/Slave and Sound Active
DMX 512 control channels: 4/3/6/4/4 (5 modes)
Remote DMX addressing(RDA): DMX address can be set remotely by iLead2420 controller or CA-T DMX tester
Great built-in lighting shows under Master/Slave operation triggered by music
Optional CA-8 easy controller for instant lighting shows at your fingertips
Full range dimmer and variable strobe effects
Big heat sink & thermal sensor for protecting LED, ensuring reliable operation
3 in 1 lens: 30°
Ideal for various applications like theatres, rental, discos, stages, pubs and DJs
Power supply: AC 100~240V, 50/60Hz
Power consumption: 85W at 230V/50Hz
LED: 21 x 3W RGB LEDs
Beam angle: 34°
Dimension: 185 x 161.5 x 185 mm
Weight: 4.1kgs
3 operation mode: DMX, Master/Slave and Sound Active
DMX 512 control channels: 4/3/6/4/4 (5 modes)
Remote DMX addressing(RDA): DMX address can be set remotely by iLead2420 controller or CA-T DMX tester
Great built-in lighting shows under Master/Slave operation triggered by music
Optional CA-8 easy controller for instant lighting shows at your fingertips
Full range dimmer and variable strobe effects
Big heat sink & thermal sensor for protecting LED, ensuring reliable operation
3 in 1 lens: 30°
Ideal for various applications like theatres, rental, discos, stages, pubs and DJs
Power supply: AC 100~240V, 50/60Hz
Power consumption: 85W at 230V/50Hz
LED: 21 x 3W RGB LEDs
Beam angle: 34°
Dimension: 185 x 161.5 x 185 mm
Weight: 4.1kgs
DMX 3/ 4/ 6 channels selectable
LED display with password protection on the rear panel
Comes with great built-in programs ( 6 chases ) and 3 editable chases
Using the latest LED technology makes important energy (cost) savings compared to traditional halogen fixtures
With the waterproof IP66 housing, it’s perfect to illuminate all kinds of buildings like: hotels, shops, discotheques, stages, amusement parks, fairground, museum, etc
Completely silent, the projector is cooled by natural air convection without fan; plus the 400Hz LED scan rate makes it also a perfect choice in TV studios
Excellent ventilation, plus a thermal sensor in LED PCB to protect LEDs from being over heated
The heavy duty aluminum housing uses a specially designed bracket, so it can be easily mounted on the floor
LED display with password protection on the rear panel
Comes with great built-in programs ( 6 chases ) and 3 editable chases
Using the latest LED technology makes important energy (cost) savings compared to traditional halogen fixtures
With the waterproof IP66 housing, it’s perfect to illuminate all kinds of buildings like: hotels, shops, discotheques, stages, amusement parks, fairground, museum, etc
Completely silent, the projector is cooled by natural air convection without fan; plus the 400Hz LED scan rate makes it also a perfect choice in TV studios
Excellent ventilation, plus a thermal sensor in LED PCB to protect LEDs from being over heated
The heavy duty aluminum housing uses a specially designed bracket, so it can be easily mounted on the floor
Innovative design with powerful beam, low heat and low power consumption, the LED Pin Spot is a perfect tool to replace the traditional halogen pin spot
Advanced LED technology, long lifespan, no need to change the lamp
Add color filter (Option) to the Pin Spot for different color performance
Change the Lens to have a bigger beam angle, 6 lens is standard, 11 lens as an accessory
The LED Pin Spot can be used as a table light with 11 lens
Beam angle: 6 or 11
Power Supply : 100 ~ 240V, 50/60 Hz
Power Consumption: 5W
LED : 1 X 3W White, 50,000 hrs rated
Size : 104 x 74 x 78 mm
Weight: 0.35kgs
Advanced LED technology, long lifespan, no need to change the lamp
Add color filter (Option) to the Pin Spot for different color performance
Change the Lens to have a bigger beam angle, 6 lens is standard, 11 lens as an accessory
The LED Pin Spot can be used as a table light with 11 lens
Beam angle: 6 or 11
Power Supply : 100 ~ 240V, 50/60 Hz
Power Consumption: 5W
LED : 1 X 3W White, 50,000 hrs rated
Size : 104 x 74 x 78 mm
Weight: 0.35kgs
Product Information
The CB-48 from iSolution will conjure up any shade or colour to perfection and is ideal for projecting onto stages and walls. This high output DMX compatible RGBW wash bar contains not only red, green and blue LEDs, but also white, giving it greater versatility and colour mixing capabilities.
Equipped with a total of 48 x 1 watt LEDs (12 x red, green, blue and white), the CB-48 is perfect for theaters, productions, churches and architectural applications that require an LED colour wash fixture that is not only extremely bright but also very versatile. With 12 white LEDs added to the fixture, users can create a wider range of colours.
Users can blend literally millions of customized RGBW mixed colours using a DMX controller, choosing from 6 different DMX operation modes (19/16/11/8/7/4 channels), or they can run the fixtures exciting built-in colour changing programmes without a controller in automatic or sound active mode. To wash larger walls and stages multiple fixtures can be linked together Master/Slave via 3-pin XLR cables. Another control option is to use the easy to operate CA-8 remote controller (sold separately), which gives users command of the built-in programmes, blackout and other basic functions.
In all modes, the CB-48 will produce rich, vibrant colours with extremely smooth fades. Equipped with 0-100% electronic dimming, it can create fast or slow colour changes, and includes a colour strobe effect.
A user-friendly 4-button LED display on the rear panel makes for easy access to its various modes, programmes and features. It also comes with versatile mounting brackets that allow it to be hung from truss or set on the floor and an IEC AC outlet on the rear for power linking.
Features:
DMX channels: 19/16/11/8/7/4 channel selectable
RGBW color mixing
High output LED colour wash bar with 48 x 1W LEDs (12: R, 12: G, 12: B, 12: W)
Smooth RGBW colour mixing
Stand alone, master/slave and sound Active modes
In-built programmes
4 LED zones, each zone can change colour separately
Colour strobe effect
Electronic dimming: 0 - 100%
Linkable via 3-pin XLR cable
4-button LED display on rear panel
Optional controller: Acme CA-8 (sold separately)
Remote Addressing via iLead
IEC AC outlet on rear for power linking
Beam angle: 25 degrees (120-degrees when lenses are removed)
Lamp life: 50,000 hours
Specifications:
Power supply: 240V
Power consumption: 48W
Dimensions: 422 x 169 x 174mm
Weight: 4.9Kgs
The CB-48 from iSolution will conjure up any shade or colour to perfection and is ideal for projecting onto stages and walls. This high output DMX compatible RGBW wash bar contains not only red, green and blue LEDs, but also white, giving it greater versatility and colour mixing capabilities.
Equipped with a total of 48 x 1 watt LEDs (12 x red, green, blue and white), the CB-48 is perfect for theaters, productions, churches and architectural applications that require an LED colour wash fixture that is not only extremely bright but also very versatile. With 12 white LEDs added to the fixture, users can create a wider range of colours.
Users can blend literally millions of customized RGBW mixed colours using a DMX controller, choosing from 6 different DMX operation modes (19/16/11/8/7/4 channels), or they can run the fixtures exciting built-in colour changing programmes without a controller in automatic or sound active mode. To wash larger walls and stages multiple fixtures can be linked together Master/Slave via 3-pin XLR cables. Another control option is to use the easy to operate CA-8 remote controller (sold separately), which gives users command of the built-in programmes, blackout and other basic functions.
In all modes, the CB-48 will produce rich, vibrant colours with extremely smooth fades. Equipped with 0-100% electronic dimming, it can create fast or slow colour changes, and includes a colour strobe effect.
A user-friendly 4-button LED display on the rear panel makes for easy access to its various modes, programmes and features. It also comes with versatile mounting brackets that allow it to be hung from truss or set on the floor and an IEC AC outlet on the rear for power linking.
Features:
DMX channels: 19/16/11/8/7/4 channel selectable
RGBW color mixing
High output LED colour wash bar with 48 x 1W LEDs (12: R, 12: G, 12: B, 12: W)
Smooth RGBW colour mixing
Stand alone, master/slave and sound Active modes
In-built programmes
4 LED zones, each zone can change colour separately
Colour strobe effect
Electronic dimming: 0 - 100%
Linkable via 3-pin XLR cable
4-button LED display on rear panel
Optional controller: Acme CA-8 (sold separately)
Remote Addressing via iLead
IEC AC outlet on rear for power linking
Beam angle: 25 degrees (120-degrees when lenses are removed)
Lamp life: 50,000 hours
Specifications:
Power supply: 240V
Power consumption: 48W
Dimensions: 422 x 169 x 174mm
Weight: 4.9Kgs
Product Information
Introducing the revolutionary iSolution CB-12. This RGB colour mixing block features four heads, each containing three of the tri-colour LEDs for a total of 12 tri-colour lamps. With a 1W red, green and blue LED per lamp, there are a total of 36 1W LEDs in this high output, compact fixture. This advanced 3 colour innovation gives users tremendous advantages over single colour LEDs, including improved RGB colour mixing, the elimination of multi-colour shadows, and a much brighter, more even field.
The fixture offers 0-100% electronic dimming, and this is yet another feature where users will see improvements as a result of the new tri-colour LED technology. With its super-smooth colour fades and flicker-free operation, the CB-12 is ideal for video/TV production applications.
A DMX controllable fixture, the CB-12 can be run in several operational modes. Each of its LEDs can be controlled individually via DMX. As another option, the fixture can be operated without a DMX controller via built-in programs with a speed control. Multiple units can also be linked in a master/slave configuration, and all of this is done via a 4-character LED display on the back of the unit.
The Fixture features a built-in power supply with auto range voltage 100-240V. Its linkable power and DMX make it easy to connect multiple units together to make a strip or blinder.
Compact and great for touring, the CB-12 measures 324 x 95 x 178mm and weighs only 3.9Kg. It comes with a convenient mounting bracket with safety hook and the units can be easily linked together.
Feature
DMX channels: 15/12/9/6/3 channel selectable
DMX Addressing: Push button with LED display
Remote Addressing via iLead
Stand Alone, Master / Slave and Sound Active
In-built programmes
LEDs: 12 x 3W Tri-colour
Beam Angle: 45 degrees
LED Expectancy: 50,000hrs
Optional CA-8 easy controller
4 LED zones, each zone can change colour separately
Specifications:
Power supply: 240V
Power consumption: 40W
Dimensions: 324 x 95 x 178mm
Weight: 3.9Kgs
Introducing the revolutionary iSolution CB-12. This RGB colour mixing block features four heads, each containing three of the tri-colour LEDs for a total of 12 tri-colour lamps. With a 1W red, green and blue LED per lamp, there are a total of 36 1W LEDs in this high output, compact fixture. This advanced 3 colour innovation gives users tremendous advantages over single colour LEDs, including improved RGB colour mixing, the elimination of multi-colour shadows, and a much brighter, more even field.
The fixture offers 0-100% electronic dimming, and this is yet another feature where users will see improvements as a result of the new tri-colour LED technology. With its super-smooth colour fades and flicker-free operation, the CB-12 is ideal for video/TV production applications.
A DMX controllable fixture, the CB-12 can be run in several operational modes. Each of its LEDs can be controlled individually via DMX. As another option, the fixture can be operated without a DMX controller via built-in programs with a speed control. Multiple units can also be linked in a master/slave configuration, and all of this is done via a 4-character LED display on the back of the unit.
The Fixture features a built-in power supply with auto range voltage 100-240V. Its linkable power and DMX make it easy to connect multiple units together to make a strip or blinder.
Compact and great for touring, the CB-12 measures 324 x 95 x 178mm and weighs only 3.9Kg. It comes with a convenient mounting bracket with safety hook and the units can be easily linked together.
Feature
DMX channels: 15/12/9/6/3 channel selectable
DMX Addressing: Push button with LED display
Remote Addressing via iLead
Stand Alone, Master / Slave and Sound Active
In-built programmes
LEDs: 12 x 3W Tri-colour
Beam Angle: 45 degrees
LED Expectancy: 50,000hrs
Optional CA-8 easy controller
4 LED zones, each zone can change colour separately
Specifications:
Power supply: 240V
Power consumption: 40W
Dimensions: 324 x 95 x 178mm
Weight: 3.9Kgs
Product Information
Creating floods of stunning light in DMX, Stand alone, Sound activated and Master/Slave modes the iSolution Color Bar 80 offer designers a perfect high performance LED solution for any stage, performance or indoor architectural application. The fixture combines every advantage associated with LED lighting - low voltage, energy saving, longevity, low heat and minimal maintenance - plus, the excitement and stunning colour versatility of full RGB functionality combined with the extra benefits of Amber to adjust the RGB colour temperature.
Providing a palette of over 16,000,000 colours, the fixture features 80 x 1W high powered RGBA LEDs and the ability to project light in DMX controlled sequences offering lighting designers limitless scope for creating dynamic or subtle mood effects including strobe, pulse, colour fades, colour changes and colour chases. The bar can be controlled in any one of its 6 selectable DMX modes enabling control of all RGBA modules working together or can be switched into 19 channel mode enabling individual addressing and control of each RGBA module.
Features:
DMX channels: 19/16/11/8/7/4 channel selectable
DMX Addressing: Push button with LED display
Remote Addressing via iLead
Stand Alone, Master / Slave and Sound Active
In-built programme
LEDs: 80 x 1W (R: 20, G:20, B:20, A:20)
Beam Angle: 25 degrees
LED Expectancy: 50,000hrs
Optional CA-8 easy controller
4 LED zones, each zone can change colour separately
Specifications:
Power supply: 240V
Power consumption: 85W
Dimensions: 964 x 80 x 120.8mm
Weight: 6.5Kgs
Creating floods of stunning light in DMX, Stand alone, Sound activated and Master/Slave modes the iSolution Color Bar 80 offer designers a perfect high performance LED solution for any stage, performance or indoor architectural application. The fixture combines every advantage associated with LED lighting - low voltage, energy saving, longevity, low heat and minimal maintenance - plus, the excitement and stunning colour versatility of full RGB functionality combined with the extra benefits of Amber to adjust the RGB colour temperature.
Providing a palette of over 16,000,000 colours, the fixture features 80 x 1W high powered RGBA LEDs and the ability to project light in DMX controlled sequences offering lighting designers limitless scope for creating dynamic or subtle mood effects including strobe, pulse, colour fades, colour changes and colour chases. The bar can be controlled in any one of its 6 selectable DMX modes enabling control of all RGBA modules working together or can be switched into 19 channel mode enabling individual addressing and control of each RGBA module.
Features:
DMX channels: 19/16/11/8/7/4 channel selectable
DMX Addressing: Push button with LED display
Remote Addressing via iLead
Stand Alone, Master / Slave and Sound Active
In-built programme
LEDs: 80 x 1W (R: 20, G:20, B:20, A:20)
Beam Angle: 25 degrees
LED Expectancy: 50,000hrs
Optional CA-8 easy controller
4 LED zones, each zone can change colour separately
Specifications:
Power supply: 240V
Power consumption: 85W
Dimensions: 964 x 80 x 120.8mm
Weight: 6.5Kgs
Product Information
The original and still the brightest slimline Par Panel available. Measuring only a few centimetres deep and utilising 212 RGB 5mm LEDs the tough metal casing houses all the features usually found on a conventional LED Par can without the excessive size.
The rear panel houses a 4 button LED display for instant access to the internal programmes and operating modes including DMX, Sound active and Master/Slave. The optional CA-8 hand controller or CA-8F foot controller gives instant, simple control over mode, pattern and blackout. Multiple Packs (up to 18 packs from a single 13A plug) can be linked for a wider synchronisation.
This is a light-weight, straight out of the bag lighting solution that brings a new level of simplicity to a professional lighting system. System comes supplied with heavy duty road bag and 1 metre DMX and power link cables.
Features:
DMX Channels: 4
DMX, sound active, auto, and master/slave modes
LEDs: 212 Ultra Bright LEDs (R: 70, G: 71, B: 71)
4 Push button LED display
Built-in microphone
IEC Power IN/Out sockets
Connections: 3-Pin XLR for DMX
Controller: Any universal DMX-512 or CA-8/CA-8F Controller
Beam angle: 15 degrees
Power consumption: 20W (per panel)
Low heat and low power consumption
No duty cycle
Specifications:
Power supply: 240V
Dimensions: 272 x 67 x 252mm (per panel)
Weight: 1.8Kgs (Per panel)
The original and still the brightest slimline Par Panel available. Measuring only a few centimetres deep and utilising 212 RGB 5mm LEDs the tough metal casing houses all the features usually found on a conventional LED Par can without the excessive size.
The rear panel houses a 4 button LED display for instant access to the internal programmes and operating modes including DMX, Sound active and Master/Slave. The optional CA-8 hand controller or CA-8F foot controller gives instant, simple control over mode, pattern and blackout. Multiple Packs (up to 18 packs from a single 13A plug) can be linked for a wider synchronisation.
This is a light-weight, straight out of the bag lighting solution that brings a new level of simplicity to a professional lighting system. System comes supplied with heavy duty road bag and 1 metre DMX and power link cables.
Features:
DMX Channels: 4
DMX, sound active, auto, and master/slave modes
LEDs: 212 Ultra Bright LEDs (R: 70, G: 71, B: 71)
4 Push button LED display
Built-in microphone
IEC Power IN/Out sockets
Connections: 3-Pin XLR for DMX
Controller: Any universal DMX-512 or CA-8/CA-8F Controller
Beam angle: 15 degrees
Power consumption: 20W (per panel)
Low heat and low power consumption
No duty cycle
Specifications:
Power supply: 240V
Dimensions: 272 x 67 x 252mm (per panel)
Weight: 1.8Kgs (Per panel)
Item No:
LED-VB-6TCP IP-25
Name:
Visio Integral V Bar 6TCP with 6x 3 Watt led´s with included power supply
Description:
The V bar Tri-color Series feature lastet LED Tri-color.
Color fading, dimming, and mixing can be achieved by V Power controller. With the top end technology, finest components, and user-friendly V power controller, V bar Tri-color Series satisfies your various needs and colors your imagination.
It is ideal for indoor use, such as hotel, culb, ba, shop, cabinet, etc.
Housed in linear extruded aluminum with tempered glass
Movable mounting bracket works as floor stand or can be easily on any surface
Optimal thermal managment system
Easy to change the lens as needed
Excellent performance, reliability, and long lifespan
Specification:
6 x 3 Watt leds full color
Compatible Power Supply: V Power 60, V Power 120, V Power 240, V Power 600
Power Consumption: 21,6 W
Beam Angels: 25°
size: 613 x 79 x 116 mm
weight: 2.7 kg
LED-VB-6TCP IP-25
Name:
Visio Integral V Bar 6TCP with 6x 3 Watt led´s with included power supply
Description:
The V bar Tri-color Series feature lastet LED Tri-color.
Color fading, dimming, and mixing can be achieved by V Power controller. With the top end technology, finest components, and user-friendly V power controller, V bar Tri-color Series satisfies your various needs and colors your imagination.
It is ideal for indoor use, such as hotel, culb, ba, shop, cabinet, etc.
Housed in linear extruded aluminum with tempered glass
Movable mounting bracket works as floor stand or can be easily on any surface
Optimal thermal managment system
Easy to change the lens as needed
Excellent performance, reliability, and long lifespan
Specification:
6 x 3 Watt leds full color
Compatible Power Supply: V Power 60, V Power 120, V Power 240, V Power 600
Power Consumption: 21,6 W
Beam Angels: 25°
size: 613 x 79 x 116 mm
weight: 2.7 kg
Item No:
LED-VB-4TCP IP-25
Name:
Visio Integral V Bar 4TCP with 4 x 3 Watt led´s with included power supply
Description:
The V bar Tri-color Series feature lastet LED Tri-color.
Color fading, dimming, and mixing can be achieved by V Power controller. With the top end technology, finest components, and user-friendly V power controller, V bar Tri-color Series satisfies your various needs and colors your imagination.
It is ideal for indoor use, such as hotel, culb, ba, shop, cabinet, etc.
Housed in linear extruded aluminum with tempered glass
Movable mounting bracket works as floor stand or can be easily on any surface
Optimal thermal managment system
Easy to change the lens as needed
Excellent performance, reliability, and long lifespan
Specification:
4 x 3 Watt leds full color
Beam Angels: 25°
LED-VB-4TCP IP-25
Name:
Visio Integral V Bar 4TCP with 4 x 3 Watt led´s with included power supply
Description:
The V bar Tri-color Series feature lastet LED Tri-color.
Color fading, dimming, and mixing can be achieved by V Power controller. With the top end technology, finest components, and user-friendly V power controller, V bar Tri-color Series satisfies your various needs and colors your imagination.
It is ideal for indoor use, such as hotel, culb, ba, shop, cabinet, etc.
Housed in linear extruded aluminum with tempered glass
Movable mounting bracket works as floor stand or can be easily on any surface
Optimal thermal managment system
Easy to change the lens as needed
Excellent performance, reliability, and long lifespan
Specification:
4 x 3 Watt leds full color
Beam Angels: 25°
Product Information
CT-100 Color Tubes are suitable for cove or back light applications. This compact and powerful illumination source is ideal for lighting bars and restaurants.
Features:
Control: LED-CC, LED-RC F + LED-PC300/LED-PC100, LED-HC 100
LEDs: 144
Power consumption 10watts
Lamp life: 100,000 hours
Specification:
Power supply: DC 24v
Dimensions: 1000 x 30 x 30mm
Weight: 0.37kgs
CT-100 Color Tubes are suitable for cove or back light applications. This compact and powerful illumination source is ideal for lighting bars and restaurants.
Features:
Control: LED-CC, LED-RC F + LED-PC300/LED-PC100, LED-HC 100
LEDs: 144
Power consumption 10watts
Lamp life: 100,000 hours
Specification:
Power supply: DC 24v
Dimensions: 1000 x 30 x 30mm
Weight: 0.37kgs
Product Information
CT-20 Color Tubes are suitable for cove or back light applications. This compact and powerful illumination source is ideal for lighting bars and restaurants.
Features:
Control: LED-CC, LED-RC F + LED-PC300/LED-PC100, LED-HC 100
LEDs: 24
Power consumption 3watts
Lamp life: 100,000 hours
Specification:
Power supply: DC 24v
Dimensions: 200 x 30 x 30mm
Weight: 0.14kgs
CT-20 Color Tubes are suitable for cove or back light applications. This compact and powerful illumination source is ideal for lighting bars and restaurants.
Features:
Control: LED-CC, LED-RC F + LED-PC300/LED-PC100, LED-HC 100
LEDs: 24
Power consumption 3watts
Lamp life: 100,000 hours
Specification:
Power supply: DC 24v
Dimensions: 200 x 30 x 30mm
Weight: 0.14kgs
Product Information
CT-50 Color Tubes are suitable for cove or back light applications. This compact and powerful illumination source is ideal for lighting bars and restaurants.
Features:
Control: LED-CC, LED-RC F + LED-PC300/LED-PC100, LED-HC 100
LEDs: 72
Power consumption 5watts
Lamp life: 100,000 hours
Specification:
Power supply: DC 24v
Dimensions: 500 x 30 x 30mm
Weight: 0.2kgs
CT-50 Color Tubes are suitable for cove or back light applications. This compact and powerful illumination source is ideal for lighting bars and restaurants.
Features:
Control: LED-CC, LED-RC F + LED-PC300/LED-PC100, LED-HC 100
LEDs: 72
Power consumption 5watts
Lamp life: 100,000 hours
Specification:
Power supply: DC 24v
Dimensions: 500 x 30 x 30mm
Weight: 0.2kgs
The American DJ Mega Pixel Arch is a unique color chasing arch that can be used alone or in conjunction with the Mega Pixel LED. Mega Pixel Arch instantly adds energy to any application. For the biggest impact, DJs, night clubs and bands should link Mega Pixel Arch and Mega Pixel LED units together to create circles, waves and unique looking LED light show solutions. The Mega Pixel Arch built-in color chase, strobe and color mixing programs.
Specifications:
- LED Arch used in conjunction with the American DJ Mega Pixel LED - Creates a stunning LED light show with when multiple Mega Pixel Arch and Mega Pixel LED units are used together
- Bright Red, Green and Blue LED banks of color chase, strobe and mix colors
- circle diameter (4 pieces needed): inner diameter ~ 85cm, outer diameter ~ 100cm
- 288 LEDs (96 Red, 96 Green, & 96 Blue LEDs)
- 7 DMX Channel Modes: 3,4,7,10, 16, 24 or 28 channel modes
- Color strobe effect (fast to slow)
- Color mix effect (fast to slow)
- LED chase speeds (fast to slow)
- Electronic Dimming 0 - 100%: Control Red, Green & Blue LEDs independently
- Linkable via 3-pin XLR cable
- 1/4-inch input jack for optional American DJ UC3 easy controller (not included)
- 4-button LED display on rear panel
- AC outlet on rear to daisy chain power
- Includes mounting brackets
- Power Draw: 31W
- Multi-voltage operation: AC 120-240V / 50~60Hz
- Dimensions without bracket (LxWxH): 711x195x143mm
- Weight: 4,8 kg
LED Advantages:
- Long life (Rated at 100,000 hrs.)
- Low power consumption
- Very low heat output
- Run all night
- RGB color mixing & Color Chasing
- Colors won`t fade in time
- Great effect with or without fog
Specifications:
- LED Arch used in conjunction with the American DJ Mega Pixel LED - Creates a stunning LED light show with when multiple Mega Pixel Arch and Mega Pixel LED units are used together
- Bright Red, Green and Blue LED banks of color chase, strobe and mix colors
- circle diameter (4 pieces needed): inner diameter ~ 85cm, outer diameter ~ 100cm
- 288 LEDs (96 Red, 96 Green, & 96 Blue LEDs)
- 7 DMX Channel Modes: 3,4,7,10, 16, 24 or 28 channel modes
- Color strobe effect (fast to slow)
- Color mix effect (fast to slow)
- LED chase speeds (fast to slow)
- Electronic Dimming 0 - 100%: Control Red, Green & Blue LEDs independently
- Linkable via 3-pin XLR cable
- 1/4-inch input jack for optional American DJ UC3 easy controller (not included)
- 4-button LED display on rear panel
- AC outlet on rear to daisy chain power
- Includes mounting brackets
- Power Draw: 31W
- Multi-voltage operation: AC 120-240V / 50~60Hz
- Dimensions without bracket (LxWxH): 711x195x143mm
- Weight: 4,8 kg
LED Advantages:
- Long life (Rated at 100,000 hrs.)
- Low power consumption
- Very low heat output
- Run all night
- RGB color mixing & Color Chasing
- Colors won`t fade in time
- Great effect with or without fog
Specifications:
- Bright, high output Ultraviolet Bar with 16x 1-Watt UV LEDs
- Great for performance stages, theatrical productions and special effects installations – requires almost no maintenance – long life LED, low heat output, low power consumption & no moving parts
- Long Life LEDs (50,000 hrs.)
- Low power consumption, low heat
- 4 Operational Modes: Sound Active, DMX-512, Master/Slave or Manual
- 1 DMX Mode
- UV strobe effect
- Electronic Dimming: 0 - 100%
- Beam angle: 10 degrees vertical x 40 degrees horizontal linear beam angle – great for wall washing
- Linkable via 3-pin XLR cable
- 3-button LED DMX display on rear panel
- Dual bracket system allows fixture to be hung or set on the ground
- Power Draw: 30W
- On/Off switch on rear panel
- Locking IEC power plug
- Multi-voltage Operation: AC 100-240V, 47/63Hz
- Dimensions (LxWxH): 320x61x175mm
- Weight: 2.2 kg
- Bright, high output Ultraviolet Bar with 16x 1-Watt UV LEDs
- Great for performance stages, theatrical productions and special effects installations – requires almost no maintenance – long life LED, low heat output, low power consumption & no moving parts
- Long Life LEDs (50,000 hrs.)
- Low power consumption, low heat
- 4 Operational Modes: Sound Active, DMX-512, Master/Slave or Manual
- 1 DMX Mode
- UV strobe effect
- Electronic Dimming: 0 - 100%
- Beam angle: 10 degrees vertical x 40 degrees horizontal linear beam angle – great for wall washing
- Linkable via 3-pin XLR cable
- 3-button LED DMX display on rear panel
- Dual bracket system allows fixture to be hung or set on the ground
- Power Draw: 30W
- On/Off switch on rear panel
- Locking IEC power plug
- Multi-voltage Operation: AC 100-240V, 47/63Hz
- Dimensions (LxWxH): 320x61x175mm
- Weight: 2.2 kg
Building Wash is a very powerful RGB LED projector, based on 36 high power 1W LEDs, It comes with interchangeable optical system,catering for various applications
Features:
DMX 3 / 4 / 6 channels selectable
LED display with password protection on the rear panel
Come with great built-in programs (16 chases)and 3 editable chases.
Using the latest LED technology makes important energy(cost)
savings compared to traditional halogen fixtures
With the waterproof lP65 housing ,it perfect to illuminate
all kinds Buildings like : hotels ,shops discotheques ,stage ,
amusement parks, fairground ,museum, etc.
Completely silent, the projector is cooled by natural air
convection without fan; plus the 400Hz LED scan rate makes it
also a perfect choice in TV studios
Thermal sensor in LED PC B to protect LEDs from over heated.
Aluminum housing comes with specially designed bracket, so it
can also be installed on the floor
Specifications:
Power Supply :AC 100-240V 50/60Hz
Power Consumption:65W
IP Rating: IP 66
LED : 36X1W LED, 50,000hrs rated
BW-36 RGB (R12, G12, B12)
BW-36 AW (Ameber 12 , CW 24)
Beam Angle:15°, 25°or 45°
Size : 205 x 222 x 310 mm
Weight :4.5kgs
Features:
DMX 3 / 4 / 6 channels selectable
LED display with password protection on the rear panel
Come with great built-in programs (16 chases)and 3 editable chases.
Using the latest LED technology makes important energy(cost)
savings compared to traditional halogen fixtures
With the waterproof lP65 housing ,it perfect to illuminate
all kinds Buildings like : hotels ,shops discotheques ,stage ,
amusement parks, fairground ,museum, etc.
Completely silent, the projector is cooled by natural air
convection without fan; plus the 400Hz LED scan rate makes it
also a perfect choice in TV studios
Thermal sensor in LED PC B to protect LEDs from over heated.
Aluminum housing comes with specially designed bracket, so it
can also be installed on the floor
Specifications:
Power Supply :AC 100-240V 50/60Hz
Power Consumption:65W
IP Rating: IP 66
LED : 36X1W LED, 50,000hrs rated
BW-36 RGB (R12, G12, B12)
BW-36 AW (Ameber 12 , CW 24)
Beam Angle:15°, 25°or 45°
Size : 205 x 222 x 310 mm
Weight :4.5kgs
Building Wash series are very heavy duty and powerful LED Projectors , based on 108 high power LEDs. It comes with different optical system, catering for various applications.
Features:
DMX Channels : BW-108P AW: 2 / 2 Ch.
BW-108P RGBA : 7 / 5 / 4 Ch.
Waterproof LED touch control panel with password protection
Come with great built-in programs (16 Chases ) and 3
editable chases
With rated lP66 housing, it is perfect for illuminating all
kinds buildings like: hotels, shops, discotheques, stage,
amusement parks, fairground, museum, etc.
Completely silent, the projector is cooled by natural air
convection not fan; Plus the 400Hz LED scan rate makes it
also a perfect choice in TV studios.
Excellent ventilation, plus a thermal sensor in LED PC B to
protect LEDs from over heated
The heavy duty aluminum housing uses a specially designed
bracket , so it can be easily mounted on the floor
Specifications:
Power Supply: AC 100-240V 50 / 60Hz
Power Consumption: BW-108:150W
IP Rating : lP66
LED: BW-108P AW: 108 x 1W LEDs , Amber 36, CooIWhite: 72
BW-108P RGBA: 108 x 1W LEDs , Amber 27; R27; G27; B27
Beam Angle: BW-108P AW/BW-108P RGBA: 30°x 65°
Size: 582 x 325 x 251 mm
Weight:18.4 kgs
Features:
DMX Channels : BW-108P AW: 2 / 2 Ch.
BW-108P RGBA : 7 / 5 / 4 Ch.
Waterproof LED touch control panel with password protection
Come with great built-in programs (16 Chases ) and 3
editable chases
With rated lP66 housing, it is perfect for illuminating all
kinds buildings like: hotels, shops, discotheques, stage,
amusement parks, fairground, museum, etc.
Completely silent, the projector is cooled by natural air
convection not fan; Plus the 400Hz LED scan rate makes it
also a perfect choice in TV studios.
Excellent ventilation, plus a thermal sensor in LED PC B to
protect LEDs from over heated
The heavy duty aluminum housing uses a specially designed
bracket , so it can be easily mounted on the floor
Specifications:
Power Supply: AC 100-240V 50 / 60Hz
Power Consumption: BW-108:150W
IP Rating : lP66
LED: BW-108P AW: 108 x 1W LEDs , Amber 36, CooIWhite: 72
BW-108P RGBA: 108 x 1W LEDs , Amber 27; R27; G27; B27
Beam Angle: BW-108P AW/BW-108P RGBA: 30°x 65°
Size: 582 x 325 x 251 mm
Weight:18.4 kgs
Building Wash series are very heavy duty and powerful LED Projectors , based on 108 high power LEDs. It comes with different optical system, catering for various applications.
Features:
DMX Channels : BW-108:12 / 9 / 4 Ch.
Waterproof LED touch control panel with password protection
Come with great built-in programs (16 Chases ) and 3
editable chases
With rated lP66 housing, it is perfect for illuminating all
kinds buildings like: hotels, shops, discotheques, stage,
amusement parks, fairground, museum, etc.
Completely silent, the projector is cooled by natural air
convection not fan; Plus the 400Hz LED scan rate makes it
also a perfect choice in TV studios.
Excellent ventilation, plus a thermal sensor in LED PC B to
protect LEDs from over heated
The heavy duty aluminum housing uses a specially designed
bracket , so it can be easily mounted on the floor
Specifications:
Power Supply: AC 100-240V 50 / 60Hz
Power Consumption: BW-108:150W
IP Rating : lP66
LED: BW-108: 108 x 1W LEDs , R36, G36, B36
Beam Angle: BW-108: 15°/ 25°or 45°
Size: 582 x 325 x 251 mm
Weight:18.4 kgs
Features:
DMX Channels : BW-108:12 / 9 / 4 Ch.
Waterproof LED touch control panel with password protection
Come with great built-in programs (16 Chases ) and 3
editable chases
With rated lP66 housing, it is perfect for illuminating all
kinds buildings like: hotels, shops, discotheques, stage,
amusement parks, fairground, museum, etc.
Completely silent, the projector is cooled by natural air
convection not fan; Plus the 400Hz LED scan rate makes it
also a perfect choice in TV studios.
Excellent ventilation, plus a thermal sensor in LED PC B to
protect LEDs from over heated
The heavy duty aluminum housing uses a specially designed
bracket , so it can be easily mounted on the floor
Specifications:
Power Supply: AC 100-240V 50 / 60Hz
Power Consumption: BW-108:150W
IP Rating : lP66
LED: BW-108: 108 x 1W LEDs , R36, G36, B36
Beam Angle: BW-108: 15°/ 25°or 45°
Size: 582 x 325 x 251 mm
Weight:18.4 kgs
Equipped with 40 high power LEDs and designed with great built-in programs, Stage Bar 40 delivers powerful light output like a stage blinder, ideal for various applications such as stages, discos, pubs, mobile DJs, wall washing, etc.
Control
• DMX-512 control channels: 1/2/2/11 switchable
• Can be controlled by iLead 2420 or any universal
DMX controllers
• LCD display for easy addressing and setting
• Data in/out: 3-pin XLR, 5-pin XLR
• Remote DMX addressing(RDA):
DMX address can be set remotely by iLead
controller, CA-T DMX tester or RC8
• Master/Slave mode runs automatically once
• DMX signal is off
Pre-programmed function
• Automatic switch between music trig and auto mode
• Great built-in programs under Master/Slave mode triggered by music
• Master/Slave mode:
i. The first unit always acts as the master unit without
presetting master or slave
ii. Fabulous built-in lighting shows for instant operation
• User-friendly easy controller CA-8 enables you to access
various lighting shows at your fingertips
Dimmer/Strobe
• Dimmer: from 0~100%
• Variable speed strobe effects
Optics
• High efficiency optical system
• High quality optical lens
• Lens available in 15°or 25°
Features
• Individual control of each LED cluster
• Sound sensitivity adjustable via the menu
• Auto-fading show with 3 different speeds
• Heavy duty floor stand for the application
in any smooth ground
• Power supply: AC 100~240V, 50/60Hz
• Power consumption:
• Light source: 16 x 3W Tri-color LEDs
• Size: 1022 x 107 x 68mm
Control
• DMX-512 control channels: 1/2/2/11 switchable
• Can be controlled by iLead 2420 or any universal
DMX controllers
• LCD display for easy addressing and setting
• Data in/out: 3-pin XLR, 5-pin XLR
• Remote DMX addressing(RDA):
DMX address can be set remotely by iLead
controller, CA-T DMX tester or RC8
• Master/Slave mode runs automatically once
• DMX signal is off
Pre-programmed function
• Automatic switch between music trig and auto mode
• Great built-in programs under Master/Slave mode triggered by music
• Master/Slave mode:
i. The first unit always acts as the master unit without
presetting master or slave
ii. Fabulous built-in lighting shows for instant operation
• User-friendly easy controller CA-8 enables you to access
various lighting shows at your fingertips
Dimmer/Strobe
• Dimmer: from 0~100%
• Variable speed strobe effects
Optics
• High efficiency optical system
• High quality optical lens
• Lens available in 15°or 25°
Features
• Individual control of each LED cluster
• Sound sensitivity adjustable via the menu
• Auto-fading show with 3 different speeds
• Heavy duty floor stand for the application
in any smooth ground
• Power supply: AC 100~240V, 50/60Hz
• Power consumption:
• Light source: 16 x 3W Tri-color LEDs
• Size: 1022 x 107 x 68mm
Building Wash 54 is a very powerful RGBW LED projector equipped with 54 high power 3W LEDs. It comes with interchangeable optical system, catering for various applications. It is also a perfect alternative for traditional par lights.
DMX 3/ 4/ 6 channels selectable
LED display with password protection on the rear panel
Comes with great built-in programs ( 6 chases ) and 3 editable chases
Using the latest LED technology makes important energy (cost) savings compared to traditional halogen fixtures
With the waterproof IP66 housing, it's perfect to illuminate all kinds of buildings like: hotels, shops, discotheques, stages, amusement parks, fairground, museum, etc
Completely silent, the projector is cooled by natural air convection without fan; plus the 400Hz LED scan rate makes it also a perfect choice in TV studios
Excellent ventilation, plus a thermal sensor in LED PCB to protect LEDs from being over heated
The heavy duty aluminum housing uses a specially designed bracket, so it can be easily mounted on the floor
Power supply: AC 100-240V, 50/60Hz
Power consumption: 140W
LED: 54X3W LED, R14, G14, B14, W12
Beam angle: 15°
Size: 360 x 219.6 x 254 mm
Weight: 9kgs
DMX 3/ 4/ 6 channels selectable
LED display with password protection on the rear panel
Comes with great built-in programs ( 6 chases ) and 3 editable chases
Using the latest LED technology makes important energy (cost) savings compared to traditional halogen fixtures
With the waterproof IP66 housing, it's perfect to illuminate all kinds of buildings like: hotels, shops, discotheques, stages, amusement parks, fairground, museum, etc
Completely silent, the projector is cooled by natural air convection without fan; plus the 400Hz LED scan rate makes it also a perfect choice in TV studios
Excellent ventilation, plus a thermal sensor in LED PCB to protect LEDs from being over heated
The heavy duty aluminum housing uses a specially designed bracket, so it can be easily mounted on the floor
Power supply: AC 100-240V, 50/60Hz
Power consumption: 140W
LED: 54X3W LED, R14, G14, B14, W12
Beam angle: 15°
Size: 360 x 219.6 x 254 mm
Weight: 9kgs
Advantage
Multi-Par 90 creates astonishing color mixing effect and powerful light output with 90 pieces of 3W CREE RGBW LEDs (Red 18pcs, Green 24pcs, Blue 24pcs, and White 24pcs).
Operation: DMX, Master/Slave, Sound Mode
DMX 512 control: 4/5/7 channels switchable
Various built-in chases activated by sound
Can be operated by easy controllers CA-9 (wireless) and CA-8
Smooth dimming 0~100% and variable strobe
Great color marco effect
Strong die-casting aluminum housing
Flexible hanging/standing dual brackets for easy mounting
Excellent cooling, low heat, long life for fixture and LEDs
15 or 25 degrees lens available
Power input: AC 100-240V, 50/60HZ
Power consumption: 280W
LED: 90pcs x 3W (R18+G24+B24+W24)
Weight: 7.9kg
Dimensions: 233.8 x 305.6 x 265 mm
Multi-Par 90 creates astonishing color mixing effect and powerful light output with 90 pieces of 3W CREE RGBW LEDs (Red 18pcs, Green 24pcs, Blue 24pcs, and White 24pcs).
Operation: DMX, Master/Slave, Sound Mode
DMX 512 control: 4/5/7 channels switchable
Various built-in chases activated by sound
Can be operated by easy controllers CA-9 (wireless) and CA-8
Smooth dimming 0~100% and variable strobe
Great color marco effect
Strong die-casting aluminum housing
Flexible hanging/standing dual brackets for easy mounting
Excellent cooling, low heat, long life for fixture and LEDs
15 or 25 degrees lens available
Power input: AC 100-240V, 50/60HZ
Power consumption: 280W
LED: 90pcs x 3W (R18+G24+B24+W24)
Weight: 7.9kg
Dimensions: 233.8 x 305.6 x 265 mm
Specifications
- Black ultra bright Par 56 with 36 1-Watt LEDs (12 Red, 12 Green, & 12 Blue LEDs)
- Great for performance stages where traditional par cans emit a lot of heat onto performers
- Long Life LEDs (50,000 hrs.)
- Low power consumption, low heat
- 4 Operational Modes: Sound Active, DMX-512, Master/Slave or Manual
- 6 DMX Channel Modes
- Smooth RGB color mixing (fast or slow color change operation)
- Color strobe effect
- Electronic Dimming: 0 - 100%
- Beam angle: 10 degrees
- Linkable via 3-pin XLR cable
- 3-button LED DMX display on rear panel
- Dual bracket system allows fixture to be hung or set on the ground
- Power Draw: 50W
- Multi-voltage Operation: AC 100-240V, 47/63Hz
- Dimensions (LxWxH): 313x240x240mm
- Weight: 1.9 kg
- Black ultra bright Par 56 with 36 1-Watt LEDs (12 Red, 12 Green, & 12 Blue LEDs)
- Great for performance stages where traditional par cans emit a lot of heat onto performers
- Long Life LEDs (50,000 hrs.)
- Low power consumption, low heat
- 4 Operational Modes: Sound Active, DMX-512, Master/Slave or Manual
- 6 DMX Channel Modes
- Smooth RGB color mixing (fast or slow color change operation)
- Color strobe effect
- Electronic Dimming: 0 - 100%
- Beam angle: 10 degrees
- Linkable via 3-pin XLR cable
- 3-button LED DMX display on rear panel
- Dual bracket system allows fixture to be hung or set on the ground
- Power Draw: 50W
- Multi-voltage Operation: AC 100-240V, 47/63Hz
- Dimensions (LxWxH): 313x240x240mm
- Weight: 1.9 kg
SYSTEM INCLUDES
- 4x Par 38 polish Par Cans (1x Red, 1x Green, 1x Blue, 1x Amber)
- 1x T16F Chase Controller system with foot control
- 1x Light Stand (extends up to 10 feet/3M)
PAR CAN SPECIFICATIONS
- Each Par Can has 12x 1W LEDs rated at 100,000 hr. life
- 25-degree beam angle
- Power Consumption: 70W max (120V)
- Power plug and chase controller power input will vary depending on country or region
- Single par can dimensions (LxWxH), weight: 120x40x180mm / 12kg
T20F FEATURES
- 4-channel chase control pack (Four 3-prong Edison sockets)
- Great for the working Musician or DJ
- DMX, 3pin, XLR In/Out for linking to other T20F s
- 20 built-in programs: 10 normal chase programs and 10 chase programs with fade time
- 7 pre-set scenes (holding the Stand By button down for 3 seconds):
Scene 1= Channel 1 On
Scene 2= Channel 2 On
Scene 3= Channel 3 On
Scene 4= Channel 4 On
Scene 5= Channel 1 and 3 On
Scene 6= Channel 2 and 4 On
Scene 7= All On
- Stand By function (Blackout)
- Chase button to select from the 20 built in chases
- Master/Slave and DMX operation modes
- Chase by way of Audio (sound activation) or 3, preset, chase speeds
- Max Load: 5A per channel or 15A max
- Circuit breaker protection
- Built-in, reversible, hanging/truss bracket
- Voltage: 120VAC / 60Hz or
T20FC FOOT CONTROLLER FEATURES
- Chase selection foot switch
- Stand By (Blackout) foot switch
- 4x Par 38 polish Par Cans (1x Red, 1x Green, 1x Blue, 1x Amber)
- 1x T16F Chase Controller system with foot control
- 1x Light Stand (extends up to 10 feet/3M)
PAR CAN SPECIFICATIONS
- Each Par Can has 12x 1W LEDs rated at 100,000 hr. life
- 25-degree beam angle
- Power Consumption: 70W max (120V)
- Power plug and chase controller power input will vary depending on country or region
- Single par can dimensions (LxWxH), weight: 120x40x180mm / 12kg
T20F FEATURES
- 4-channel chase control pack (Four 3-prong Edison sockets)
- Great for the working Musician or DJ
- DMX, 3pin, XLR In/Out for linking to other T20F s
- 20 built-in programs: 10 normal chase programs and 10 chase programs with fade time
- 7 pre-set scenes (holding the Stand By button down for 3 seconds):
Scene 1= Channel 1 On
Scene 2= Channel 2 On
Scene 3= Channel 3 On
Scene 4= Channel 4 On
Scene 5= Channel 1 and 3 On
Scene 6= Channel 2 and 4 On
Scene 7= All On
- Stand By function (Blackout)
- Chase button to select from the 20 built in chases
- Master/Slave and DMX operation modes
- Chase by way of Audio (sound activation) or 3, preset, chase speeds
- Max Load: 5A per channel or 15A max
- Circuit breaker protection
- Built-in, reversible, hanging/truss bracket
- Voltage: 120VAC / 60Hz or
T20FC FOOT CONTROLLER FEATURES
- Chase selection foot switch
- Stand By (Blackout) foot switch
SPECIFICATIONS:
• 6-inch/ 150mm LED Color Ball
• Long Life LED Technology - No need to change bulbs
• 15 Exciting LED Colors plus White
• Each unit includes one easy-to-use wireless remote to control: Manual Color Change; Auto Color Change; Flash; On/Off
• Includes AC Power Supply
• Dimensions (LxWxH): 155x155x160mm
• Weight: 1kg
• 6-inch/ 150mm LED Color Ball
• Long Life LED Technology - No need to change bulbs
• 15 Exciting LED Colors plus White
• Each unit includes one easy-to-use wireless remote to control: Manual Color Change; Auto Color Change; Flash; On/Off
• Includes AC Power Supply
• Dimensions (LxWxH): 155x155x160mm
• Weight: 1kg
FEATURES:
• Easy-to-use LED color wash with 140 total LEDS (35 red, 35 blue, 35 green 35 amber LEDs)
• Great for DJs, small clubs and house parties looking for a burst of color excitement
• Control chase programs, speed of chase and sound sensitivity from convenient control knobs
• Includes mounting bracket and tabletop stand
• Run all night - no duty cycle
• Long life LEDs (100,000 hr. rating)
• In/Out IEC power connections to daisy-chain power
• Dimensions (LxWxH): 375x121x165 mm
• Weight: 1,1 kg
• Easy-to-use LED color wash with 140 total LEDS (35 red, 35 blue, 35 green 35 amber LEDs)
• Great for DJs, small clubs and house parties looking for a burst of color excitement
• Control chase programs, speed of chase and sound sensitivity from convenient control knobs
• Includes mounting bracket and tabletop stand
• Run all night - no duty cycle
• Long life LEDs (100,000 hr. rating)
• In/Out IEC power connections to daisy-chain power
• Dimensions (LxWxH): 375x121x165 mm
• Weight: 1,1 kg
Go Beyond Decorations...Make Your Parties More Memorable This Year! The LED Color Tube is an exciting, bright LED color changing tube that consumes very little power, generates no heat, and has an LED lifespan of 30,000 hours.
The LED Color Tube includes an inferred wireless remote to change colors, a wall mounting brackets, and a base to mount the tube vertically. This lighting effect is best when used in multiples for home parties, holiday lighting, architectural lighting, retail stores, bands, night clubs, and mobile entertainers.
Specifications:
40-inch/ 1000mm LED Color Tube with UV-resistant polycarbonate tubing
96 Bright LEDs (32 Red, 32 Green, 32 Blue)
30,000 Long Life LED Technology
15 Exciting LED Colors plus White
Rainbow color effect
Each unit includes one easy-to-use wireless remote to control: Manual Color Change; Auto Color Change; Flash; Rainbow Effect; Slow to Fast Color Strobing; On/Off
Includes AC power supply, two wall mounting brackets and base to stand LED Color Tube up vertically
Power Consumption: 6W
Dimensions (LxWxH): 40”x2”x2” / 1016x50x50mm
Weight: 2 lbs. / 1 kgs.
Actual Shipping Weight 3 lbs.
The LED Color Tube includes an inferred wireless remote to change colors, a wall mounting brackets, and a base to mount the tube vertically. This lighting effect is best when used in multiples for home parties, holiday lighting, architectural lighting, retail stores, bands, night clubs, and mobile entertainers.
Specifications:
40-inch/ 1000mm LED Color Tube with UV-resistant polycarbonate tubing
96 Bright LEDs (32 Red, 32 Green, 32 Blue)
30,000 Long Life LED Technology
15 Exciting LED Colors plus White
Rainbow color effect
Each unit includes one easy-to-use wireless remote to control: Manual Color Change; Auto Color Change; Flash; Rainbow Effect; Slow to Fast Color Strobing; On/Off
Includes AC power supply, two wall mounting brackets and base to stand LED Color Tube up vertically
Power Consumption: 6W
Dimensions (LxWxH): 40”x2”x2” / 1016x50x50mm
Weight: 2 lbs. / 1 kgs.
Actual Shipping Weight 3 lbs.
Pro Par 36 Bulb, 3 Watt LED, RGBW
LED Beam Scan
- Bright 3W white beam DMX LED Pinspot with panning head
- 12-degree beam angle
- 3 or 5 channel DMX Modes
- DMX-512 protocol with 4-button DMX LED menu
- Operational modes: Sound active, DMX & Master/Slave
- Strobe effect
- Electronic Dimming: 0-100%
- Pan: Up to 270 degrees
- Long-life LED: 50,000 hour LED life
- Very low heat output and power consumption
- Includes removable hanging bracket for mounting on truss, or remove bracket so the unit may be set upright on a table or floor
- 6-degree beam angle lens also included
- Multi-voltage operation: AC 100V-240V 50/60Hz
- In/Out IEC power connections to daisy-chain power
- Power consumption: 15W per unit
- Compatible with the UC3 easy-to-use controller (sold separately)
- Dimensions (LxWxH): 6.75" x 6.25" x 7.25" / 172x157x182mm
- Weight: 3 lbs. / 1.25 kgs.
- Bright 3W white beam DMX LED Pinspot with panning head
- 12-degree beam angle
- 3 or 5 channel DMX Modes
- DMX-512 protocol with 4-button DMX LED menu
- Operational modes: Sound active, DMX & Master/Slave
- Strobe effect
- Electronic Dimming: 0-100%
- Pan: Up to 270 degrees
- Long-life LED: 50,000 hour LED life
- Very low heat output and power consumption
- Includes removable hanging bracket for mounting on truss, or remove bracket so the unit may be set upright on a table or floor
- 6-degree beam angle lens also included
- Multi-voltage operation: AC 100V-240V 50/60Hz
- In/Out IEC power connections to daisy-chain power
- Power consumption: 15W per unit
- Compatible with the UC3 easy-to-use controller (sold separately)
- Dimensions (LxWxH): 6.75" x 6.25" x 7.25" / 172x157x182mm
- Weight: 3 lbs. / 1.25 kgs.
4 sections per panel, 144 Tri-Color Led SMD LEDs in total (12 red. 12 blue, 12 green each section )
DMX Channels: 1, 4, 16CH selectable.
Program can be upgraded by Mini software up-grader IU-01
Great for architectural lighting, stage entertainment and theatrical applications.
Control chase programs, speed of chase and sound sensitivity.
Can be mounted on the wall, ceiling, etc.
Run all night – no duty cycle.
Long life LEDs(100,000hr. rating)
In/Out IEC power connections to daisy – chain power.
Power Consumption: 36W
Multi-voltage operation: AC100V-240V, 50/60Hz
Dimensions ( excluding bracket L x W x H): 590 x 590 x 180mm
Weight (per unit) : 6kgs
DMX Channels: 1, 4, 16CH selectable.
Program can be upgraded by Mini software up-grader IU-01
Great for architectural lighting, stage entertainment and theatrical applications.
Control chase programs, speed of chase and sound sensitivity.
Can be mounted on the wall, ceiling, etc.
Run all night – no duty cycle.
Long life LEDs(100,000hr. rating)
In/Out IEC power connections to daisy – chain power.
Power Consumption: 36W
Multi-voltage operation: AC100V-240V, 50/60Hz
Dimensions ( excluding bracket L x W x H): 590 x 590 x 180mm
Weight (per unit) : 6kgs
Features Tri-LED lens and Tri-color LEDs, delivering superior color mixing and powerful lighting effect
DMX 512 control: 3/6/6/9/12/15 channels switchable
Three operation modes: DMX, Master/Slave mode, Sound Active
Great built-in programs under Master/Slave triggered by music
Optional easy controller CA-8 for instant lighting shows
LCD display for easy addressing and setting
Perfect for pubs, discos, parties, Mobie DJs, etc
Power supply: AC 100~240V, 50/60Hz
Power consum Power consumption: 151W
Light source: 48×3W Tri-color LEDs
Size: 965 x 170 x 152 mm
DMX 512 control: 3/6/6/9/12/15 channels switchable
Three operation modes: DMX, Master/Slave mode, Sound Active
Great built-in programs under Master/Slave triggered by music
Optional easy controller CA-8 for instant lighting shows
LCD display for easy addressing and setting
Perfect for pubs, discos, parties, Mobie DJs, etc
Power supply: AC 100~240V, 50/60Hz
Power consum Power consumption: 151W
Light source: 48×3W Tri-color LEDs
Size: 965 x 170 x 152 mm
Product Information
The FLS Color Strips are available in various individual colours or this tri-colour strip featuring 150 tri-colour LEDs per 5 metre roll. The strip can be cut every 5 LEDs (167mm). These Ultra Bright colour strips are ideal for cove or back-light applications.
Features:
Self Adhesive backings
Can be cut at 167mm intervals to suit required lengths
Bright in output and low power consumption
LED life expectancy: 50,000 hours
Supplied on a 5 metre roll
Specifications:
Power Supply: DC 24V
Power Consumption: 32.4W/5m
SMD Tri-colour LED: 150pcs/5m
Beam Angle: 120 degrees
Dimensions: 10 x 5000mm
Weight: 0.23Kgs
The FLS Color Strips are available in various individual colours or this tri-colour strip featuring 150 tri-colour LEDs per 5 metre roll. The strip can be cut every 5 LEDs (167mm). These Ultra Bright colour strips are ideal for cove or back-light applications.
Features:
Self Adhesive backings
Can be cut at 167mm intervals to suit required lengths
Bright in output and low power consumption
LED life expectancy: 50,000 hours
Supplied on a 5 metre roll
Specifications:
Power Supply: DC 24V
Power Consumption: 32.4W/5m
SMD Tri-colour LED: 150pcs/5m
Beam Angle: 120 degrees
Dimensions: 10 x 5000mm
Weight: 0.23Kgs
Operation: DMX, Master/Slave, Sound Mode
DMX 512 control: 4/5/7 channels switchable
Various built-in chases activated by sound
Can be operated by easy controllers CA-9 (wireless) and CA-8
Smooth dimming 0~100% and variable strobe
Great color marco effect
Strong die-casting aluminum housing
Flexible hanging/standing dual brackets for easy mounting
Excellent cooling, low heat, long life for fixture and LEDs
15 or 30 degrees lens available
Power input: AC 100-240V, 50/60HZ
Power consumption: 280W
LED: 90pcs x 3W (R18+G24+B24+W24)
Weight: 7.9kg
Dimensions: 233.8 x 305.6 x 265 mm
DMX 512 control: 4/5/7 channels switchable
Various built-in chases activated by sound
Can be operated by easy controllers CA-9 (wireless) and CA-8
Smooth dimming 0~100% and variable strobe
Great color marco effect
Strong die-casting aluminum housing
Flexible hanging/standing dual brackets for easy mounting
Excellent cooling, low heat, long life for fixture and LEDs
15 or 30 degrees lens available
Power input: AC 100-240V, 50/60HZ
Power consumption: 280W
LED: 90pcs x 3W (R18+G24+B24+W24)
Weight: 7.9kg
Dimensions: 233.8 x 305.6 x 265 mm
Featuring 16 pieces of high powered 1W SMD UV LEDs
UV Panel 16 delivers strong output and excellent UV effect
DMX control channels: strobe, dimmer
3 control modes: DMX, Master/Slave and Sound Active
Optional CA-8 easy controller for instant lighting shows
Full range of dimmer and variable strobe effects
LED display for easy navigation
Ideal for bars, stages, discos, Mobile DJs, etc
Power supply: AC 100~240V 50/60Hz
Power consumption:23W at 230V
LED: 16 x 1W UV LEDs
Beam angle:120°
Size:263X230X64mm
Weight:1.8Kgs
UV Panel 16 delivers strong output and excellent UV effect
DMX control channels: strobe, dimmer
3 control modes: DMX, Master/Slave and Sound Active
Optional CA-8 easy controller for instant lighting shows
Full range of dimmer and variable strobe effects
LED display for easy navigation
Ideal for bars, stages, discos, Mobile DJs, etc
Power supply: AC 100~240V 50/60Hz
Power consumption:23W at 230V
LED: 16 x 1W UV LEDs
Beam angle:120°
Size:263X230X64mm
Weight:1.8Kgs






