FBT Mitus 206LA
FBT MITUS 206LA - Active Precision Coverage Vertical Line Array
600w RMS LF/MF & 300w RMS HF - 134dB SPL
Key Features:
2 x 6.5’’ (165 mm) B&C Neodymium Magnet Woofers with 1.7’’ (44 mm) voice coils
B&C Neodymium HF Driver: 2.5’’ (64 mm) voice coil with 1.4’’ (36 mm) exit
Biamped: Class D built-in amplifiers with switch mode power supply: 600w RMS LF and 300w RMS HF
Amplification circuitry enclosed in a Aluminum Chassis acting as a heat sink allowing maximum passive cooling and prevents thermal shutdowns
134 dB max. SPL (single cab) 140 dB max. SPL ( 6+ cabs in array)
Frequency Response: 68Hz- 20kHz
On-board DSP with 8 presets, +/- 5db HF level control for accurate amplitude shading
Control panel with XLR input and link out, volume control, presets, HF level control, HP-filter, ground-lift switch
100° horizontal waveguide with very low distortion and near flat wavefront up to 18 khz
High impact polypropylene gas-injected cabinet enclosure with integrated flying hardware, adjustable from 0° to 10°, in 2° steps
Ideal for small to medium sized applications, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet line arrays
16 gauge black powder coated steel protection grille with FBT's exclusive Synthetic foam backing to prevent moisture damage to the drivers
Quick locking built in internal cab latching hardware allows fast array setup and provides a clean appearance
The MITUS 206LA can be used in covered outdoor applications where the system is not directly exposed to the elements
Wide range of hardware accessories for flying and ground stacked configurations
Net weight: 14 kg. (31lbs.) allows use when venue support structures cannot accommodate heavy weighted line arrays
600w RMS LF/MF & 300w RMS HF - 134dB SPL
Key Features:
2 x 6.5’’ (165 mm) B&C Neodymium Magnet Woofers with 1.7’’ (44 mm) voice coils
B&C Neodymium HF Driver: 2.5’’ (64 mm) voice coil with 1.4’’ (36 mm) exit
Biamped: Class D built-in amplifiers with switch mode power supply: 600w RMS LF and 300w RMS HF
Amplification circuitry enclosed in a Aluminum Chassis acting as a heat sink allowing maximum passive cooling and prevents thermal shutdowns
134 dB max. SPL (single cab) 140 dB max. SPL ( 6+ cabs in array)
Frequency Response: 68Hz- 20kHz
On-board DSP with 8 presets, +/- 5db HF level control for accurate amplitude shading
Control panel with XLR input and link out, volume control, presets, HF level control, HP-filter, ground-lift switch
100° horizontal waveguide with very low distortion and near flat wavefront up to 18 khz
High impact polypropylene gas-injected cabinet enclosure with integrated flying hardware, adjustable from 0° to 10°, in 2° steps
Ideal for small to medium sized applications, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet line arrays
16 gauge black powder coated steel protection grille with FBT's exclusive Synthetic foam backing to prevent moisture damage to the drivers
Quick locking built in internal cab latching hardware allows fast array setup and provides a clean appearance
The MITUS 206LA can be used in covered outdoor applications where the system is not directly exposed to the elements
Wide range of hardware accessories for flying and ground stacked configurations
Net weight: 14 kg. (31lbs.) allows use when venue support structures cannot accommodate heavy weighted line arrays
FBT Mitus 212FSA
The MITUS 212FSA is a powered subwoofer intended for use along with the MITUS 206LA powered 2 way line arrays. It can be flown above the MITUS 206LA Line Arrays, up to 12 units of MITUS 206LA cabinets suspended below it, or in ground stack applications, with the MITUS 206LA Line Arrays placed on top of the MITUS 212FSA Sub, Mitus 118sa, Mitus 121sa thru the use of the MT-B206 ground stack base unit. Another ground stack mounting option is using the optional MT-J206 joint bar which allows up to 2 MITUS 206 LA line arrays to be placed above the MITUS 212FSA Sub. Completely Made in Italy.
Class D 1200W RMS amp,switch mode power supply
2x12" B&C high excursion neodymium magnet woofers, with 3" V.C., custom made for FBT
Bandpass design, 5/8" (15mm) Baltic birch plywood cab construction,internally braced and covered in a black paint finish (white finish available by special order)
Flyable or ground stackable
Steel Grille w/ synthetic foam lining to prevent moisture damage to the woofers
Neutrik Balanced XLR in/link out
8 EQ Presets
Adjustable Delay control
Phase reversal switch: 0-180 degrees,ground lift switch
Volume control
Powercon AC in/thru
Completely Made In Italy with all European mil-spec electronic components and drivers
Frequency Response : 45Hz- 120HZ @-6dB
Completely Made In Italy :
Product Weight : 80.5 lbs
Product Weight : 36.5 kg
Shipping Weight : 90.4 lbs
Shipping Weight : 41 kg
Current Draw : 640 Watt
Depth : 26 in
Depth : 660 mm
Height : 16.5 in
Height : 420 mm
Width : 22.6 in
Width : 574 mm
Active Power : 1200 Watt
Peak Power : 2400 Watt
AC Voltage : 120 Volts
SPL Max : 138 dB
Class D 1200W RMS amp,switch mode power supply
2x12" B&C high excursion neodymium magnet woofers, with 3" V.C., custom made for FBT
Bandpass design, 5/8" (15mm) Baltic birch plywood cab construction,internally braced and covered in a black paint finish (white finish available by special order)
Flyable or ground stackable
Steel Grille w/ synthetic foam lining to prevent moisture damage to the woofers
Neutrik Balanced XLR in/link out
8 EQ Presets
Adjustable Delay control
Phase reversal switch: 0-180 degrees,ground lift switch
Volume control
Powercon AC in/thru
Completely Made In Italy with all European mil-spec electronic components and drivers
Frequency Response : 45Hz- 120HZ @-6dB
Completely Made In Italy :
Product Weight : 80.5 lbs
Product Weight : 36.5 kg
Shipping Weight : 90.4 lbs
Shipping Weight : 41 kg
Current Draw : 640 Watt
Depth : 26 in
Depth : 660 mm
Height : 16.5 in
Height : 420 mm
Width : 22.6 in
Width : 574 mm
Active Power : 1200 Watt
Peak Power : 2400 Watt
AC Voltage : 120 Volts
SPL Max : 138 dB
FBT Mitus 118SA
The FBT Mitus 118SA - 1200W 139dB SPL Processed Active Subwoofer
The MITUS 118SA is a powered vented bandpass designed subwoofer with a 3/4"(18mm)Baltic birch plywood cabinet featuring a B&C 18" neodymium magnet woofer with a 3" voice coil and powered by a 1200w RMS Class D Amp with switch mode power supply. With a frequency response down to 36Hz, the Mitus 118sa delivers 139db SPL. and features a Baltic birch plywood cabinet, with a heavy duty grille and with a dust/moisture protection foam backing.Completely Made In Italy
THE FBT MITUS - Setting a New Milestone
Advancing the concept of line arrays in terms of power, performance, weight, flexibility and ease of use, the new MITUS sound reinforcement series is the true result of our experience and passion for excellence.
A comprehensive range of line array systems, speakers, subwoofers and monitor systems, available in active or passive design, to deliver the finest sound in all applications, from touring to permanent installation.
High quality B&C neodymium magnet woofers, custom manufactured for FBT. The latest generation of B&C compression drivers. High efficiency Class D power amplifiers modules with switch mode power supplies, Neutrik Powercon IN and LINK OUT power receptacles DSP with A/D-D/A low noise converters providing crossover, equalization, system protection along with 8 selectable presets.
Die-cast aluminum chassis. New aluminum die-cast carrying handles. Heavy duty metal grille with anti-resonance spacers and FBT exclusive synthetic cloth.
5 different configurations allowed, suspended or ground stacked. A wide range of accessories makes the MITUS range extremely flexible for live or permanent installations.
Mitus 118SA
FEATURES
1200W - 139dB SPL Processed Active Subwoofer
Compact vented band pass subwoofer design enclosure
460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil
Frequency response from 36Hz to 100Hz
Class D amplifier delivering 1200WRMS
Switch mode power supply
DSP with 8 presets, cardioids and infra configurations, delay
Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, groundlift
18 mm (3/4’’) birch plywood enclosure, scratch resistant black paint
Eight M10 fly points, M20 top mount stand socket and two FBT design aluminum handles
Optional 4 swivel-mount casters 80 mm (3.15’’) on request
Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base
SPECS
1200w RMS : Class D amp w/ switch mode Power Supply
Frequency Response : 36Hz-100Hz @-6dB
Maximum SPL : 139 dB
Dimensions : 24"wx24.75hx30.4"d
Net Wt. : 103 Lbs.
Depth : 28.7 in
Depth : 730 mm
Height : 23.4 in
Height : 594 mm
Width : 22.6 in
Width : 574 mm
Product Weight : 103.6 lbs
Product Weight : 47 kg
Shipping Weight : 123.9 lbs
Shipping Weight : 56.2 kg
Current Draw : 640 Watt
SPL Max : 139 dB
The MITUS 118SA is a powered vented bandpass designed subwoofer with a 3/4"(18mm)Baltic birch plywood cabinet featuring a B&C 18" neodymium magnet woofer with a 3" voice coil and powered by a 1200w RMS Class D Amp with switch mode power supply. With a frequency response down to 36Hz, the Mitus 118sa delivers 139db SPL. and features a Baltic birch plywood cabinet, with a heavy duty grille and with a dust/moisture protection foam backing.Completely Made In Italy
THE FBT MITUS - Setting a New Milestone
Advancing the concept of line arrays in terms of power, performance, weight, flexibility and ease of use, the new MITUS sound reinforcement series is the true result of our experience and passion for excellence.
A comprehensive range of line array systems, speakers, subwoofers and monitor systems, available in active or passive design, to deliver the finest sound in all applications, from touring to permanent installation.
High quality B&C neodymium magnet woofers, custom manufactured for FBT. The latest generation of B&C compression drivers. High efficiency Class D power amplifiers modules with switch mode power supplies, Neutrik Powercon IN and LINK OUT power receptacles DSP with A/D-D/A low noise converters providing crossover, equalization, system protection along with 8 selectable presets.
Die-cast aluminum chassis. New aluminum die-cast carrying handles. Heavy duty metal grille with anti-resonance spacers and FBT exclusive synthetic cloth.
5 different configurations allowed, suspended or ground stacked. A wide range of accessories makes the MITUS range extremely flexible for live or permanent installations.
Mitus 118SA
FEATURES
1200W - 139dB SPL Processed Active Subwoofer
Compact vented band pass subwoofer design enclosure
460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil
Frequency response from 36Hz to 100Hz
Class D amplifier delivering 1200WRMS
Switch mode power supply
DSP with 8 presets, cardioids and infra configurations, delay
Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, groundlift
18 mm (3/4’’) birch plywood enclosure, scratch resistant black paint
Eight M10 fly points, M20 top mount stand socket and two FBT design aluminum handles
Optional 4 swivel-mount casters 80 mm (3.15’’) on request
Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base
SPECS
1200w RMS : Class D amp w/ switch mode Power Supply
Frequency Response : 36Hz-100Hz @-6dB
Maximum SPL : 139 dB
Dimensions : 24"wx24.75hx30.4"d
Net Wt. : 103 Lbs.
Depth : 28.7 in
Depth : 730 mm
Height : 23.4 in
Height : 594 mm
Width : 22.6 in
Width : 574 mm
Product Weight : 103.6 lbs
Product Weight : 47 kg
Shipping Weight : 123.9 lbs
Shipping Weight : 56.2 kg
Current Draw : 640 Watt
SPL Max : 139 dB
